CV5369 cathode ray tube. This is a dual trace oscilloscope tube with a flat face.
|
This CRT measures 375x105mm overall and has a B12F base plus 3 sets of side connectors and an EHT connector |
NB this data comes from the data sheet for a 4LP1 CRT assuming that this tube is the same except for having P31 (green) phosphor.
Heater voltage | 6.3V |
Heater current | 550mA |
Max anode 1 voltage | 1.7kV |
Min anode 1 voltage | 600V |
Max anode 2 voltage | 1.2kV |
Max anode 3 voltage | 4.0kV |
Min anode 3 voltage | 600V |
Max anode 4 voltage | 8.0kV |
Min anode 4 voltage | 1.0kV |
Max voltage difference Va4-Va3 | 4.0kV |
Max grid voltage | -200V |
Min grid voltage | 1.0V |
Max peak heater-cathode voltage | 250V |
Max total anode dissipation | 3.0W |
Max power input to screen | 3.0mW/cm2 |
For further information refer to 4LP1 via http://www.tubedata.info
Pin |
Function |
1 | Grid |
2 | Cathode |
3 | Heater |
4 | Heater |
5 | Anode 2 |
6 | i/c |
7 | Anode 1 |
8 | i/c |
9 | i/c |
10 | i/c |
11 | i/c |
12 | i/c |
The side connectors are as follows (refer to the datasheet for 4LP1): two connectors on the same side as the post deflection accelerator
anode (anode 4) connector are anode 3 and Y1;
two connectors on the opposite side are anode 3 and Y2, two connectors closer to the screen are X1 and X2.
|